Support Home
All Products


    How do I set up my Nike+ SportBand?

    Last Modified

    How helpful was this article?

    5 / 5
    Rate this

    Thanks for your feedback.

    To complete Nike+ SportBand setup, follow the steps below. You can also find this information in the SportBand Manual.

    1. Download Nike+ Connect (click the green "Download Now" text at the bottom of the page) and follow the on-screen installation steps.
    2. Once Nike+ Connect has been installed, you’ll be prompted to plug your SportBand into your computer’s USB port. Detach the Link from the band, remove the plastic sticker, and insert the Link into a USB port.
    3. Sign in to Nike+. If you haven't yet connected with Nike+, click "Join". Your run data will be stored with Nike+.
    4. Configure your settings within the Nike+ Connect software. Click the “Profile” tab to enter your weight and select your units of measurement. You can also use the “Time & Date” tab to customize your clock settings and the “Customize” tab to edit the information you see while using the SportBand.

    You should now be ready to run with your SportBand. See our guide for how to use the SportBand if you have any questions.

    Which FuelBand do I have?

    Do I have a FuelBand or a FuelBand SE? Look inside your band to find out.

    © 2014 Nike, Inc. All Rights Reserved
    Contact Us